Your basket:
0 item(s): £0.00

Account holders

Stihl FS 70 RC-E brushcutter/strimmer (27.2cc)


RRP: £329.17 + VAT (£395.00 inc VAT)
Our price : £246.87  + VAT (£296.24 inc VAT) *

In stock

Delivery restrictions and/or surcharges may apply to this item.

Product description

Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.

Reduced-emission engine technology

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Loop handle (R)

The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.

STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Multi-function control handle

Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.

Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

Technical Data
Performance 0.9 kW
Power output 1.2 hp
Displacement 27.2 cm3
Weight 4.8 kg
Sound pressure level with metal tool 94 dB(A)
Sound pressure level with plastic tool 94 dB(A)
Sound power level with metal tool 107 dB(A)
Sound power level 107 dB(A)
Vibration value, right with plastic tool 6 m/s2
Vibration value, left with plastic tool 7.6 m/s2
Vibration value, left with metal tool 6.6 m/s2
Vibration value, right with metal tool 6.6 m/s2
Total length 170 cm
Cutting diameter 420 mm
Tank volume 0.34 litres
Standard cutting tool AutoCut C 25-2

Product data