Stein SMB1000 single bollard lowering device

RRP: £229.00 (ex. VAT)

£209.47 £199.00 ex VAT (£238.80 inc VAT)

Item(s) in stock
Available now
Item(s) in stock
Available now
SKU: SS-SMB1000 Category:


The Stein SMB1000 single bollard lowering device has a WLL of 1000kg and is designed to work effectively with ropes of up to 14mm (Recommended Rope – STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear.

To help prevent damage to the tree the device is fitted with 2 replaceable heavy-duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber.

The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004).

For added security, it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling – STEIN 20mm Multi-Sling SS-3372008005).

What’s Included?

  • Stein SMB1000 Single Bollard Lowering Device
  • Ratchet Strap
  • Protection Rubbers

Ratchet Strap Specifications
Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength.

This strapping system allows the device to be fitted to a tree with a diameter of up to 145cm.

The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the buckle before failure.

Product specification

Working Load Limit

1000kg (WLL) Refer to Manual


210mm (w) x 310mm (h)

Bollard Dimension

73mm Diameter x 140mm (l)


Back Plate 5mm Steel


15mm Solid Bar

Body Finish

Powder Coated

Bollard Finish

Lacquered with Rust Prevention


148mm (l) x 50mm (w) x 50mm (h)

Rubber Material

SBR/NR Rubber

Rubber Hardness

70 medium/hard (Shore A Scale)

Strapping System

Ratchet Handle with tail

Webbing length

4.65m (5.0m combined with Ratchet Handle)


4.4kg (excluding Ratchet Strap) & 5.8kg (Including Ratchet Strap)


5% Black Friday

This offer will be applied automatically as soon as your order meets any purchase requirements.

Offer valid until 30/11/2021